Configure your computer to use DHCP

1. Right-click My Network Places and choose Properties.
2. On the NIC that is (usually) labeled as Local Area Connection – right-click and choose Properties.

1. Select TCP/IP (make sure you don’t remove the check mark accidentally) and press the Properties button.

1. Make sure you have “Obtain Automatically” selected.

1. You can verify your settings by running ipconfig /all at a Command Prompt:

1. Ok all the way out.

Add a second (or third and so on), static, IP address

1. Click Start and choose Run. Enter Regedit and press Enter.

Note: On Windows 2000 and NT you need to run Regedt32 instead.

1. Navigate to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSetServices\Tcpip\Parameters\Interfaces\{B003AD4A-B6DB-44FD-9741-CBA3C51B6498}

(actual GUID of the NIC may vary, select the one that represents your own NIC (from step 2 above)

1. Select the IPAddress key and double click it.
2. In the Edit Multi String dialog box enter a second (and third and so on) IP address. Make sure you enter each IP on a separate line. Click Ok.

1. Select the SubnetMask key and double click it.
2. In the Edit Multi String dialog box enter a second (and third and so on) Subnet Mask. Make sure you enter each Subnet Mask on a separate line. Click Ok.

1. Close the registry editor.
2. Go back to your network properties, right-click your NIC and select Disable.

1. Right-click your NIC and select Enable.

1. Verify your settings by running ipconfig /all at a Command Prompt:

Done!

Windows 98 users: This trick can also be accomplished with Windows 98, only there you need to modify the following registry path (instead of the one in step 2 above):

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class'\etTrans

In Windows 98 you’ll also need to reboot your computer for the trick to work.

Source

How to run MAC OSX leopard on ordinary Intel/AMD machine ? Answer is here first of all you have to download a modified version of OSX called OSX86.Find it on your faviourate Bittorrent site.For new user’s i recommend Kalyway you can also check your system compaitibilty here. This guide will show you how to make a Dual Boot 10.5.X OSX86 System with WINDOWS VISTA . Use this guide with your favourite distro { Kalyway | iAtkos | Leo4all | Jas | iDeneb | iPC }

1.      First of all you have to install Vista. It’s easy and I m sure that you are familiar with it.

2.     Now comes to  Partitioning before installing OSX you need to have a partition of minimum 10 GB recommended 20 GB+ . The partition must be formatted as FAT-32 Primary Partition.

You can use Partition Magic or Gparted live cd or Windows Disk Management.

3.      Boot into Windows installation and open Command Prompt { Start < All Program < Accessories < Command prompt } With Administrative Privillage and run following commands.

Read Full Story…

In windows Vista, when you copying file from one computer to another computer through network it will show you the speed per second depending on You Network Adapter, HUB, Switch, Cable… you are using. You might still wondering how fast of your network? Or How to make your network high performance.

You network connection slow or fast depend on the Component of your connection, so that is very important to know that Which component that cause your network slow…

1. Network Adapter
A network adapter is the device that physically connects your computer to the network. The network itself will be Ethernet (which comes in three speeds, 10Megabit, 100Mb, and 1000Mb). So if you you have a low speed Ethernet adapter, You network speed will be limited by that adapter. Buy anther one!

2.Ethernet Hub or Switch
Most Ethernet networks use a hub or switch, which serves as the central connection point and moves data around. Like the network adapters, they have three speed ratings, 10Mb, 100Mb, and 1000Mb. Your switch must support the same speed as your network adapters to use it on your network. You should use a hub or switch that supports your full range of network adapter speeds, so you don’t limit the higher-speed computers.

Switches perform more efficiently than hubs in high-traffic networks, so it’s a good idea to use a switch

3.Motherboard Speed
The motherboard’s processing speed has inherent limits that include (to a degree) network performance. A faster motherboard generally means faster everything, including network performance. Upgrading the motherboard is a good decision also.

4.Hard Disk Read-Write Speed
Disk performance (how much information you can read or write from the disk in a second) is often the primary factor to network performance. Since most network data represents a file, your hard disk has to read the source file and another disk must write it to complete the data transfer.

You can improve your disk performance by using a faster disk, which makes more information available, and a more efficient disk interface, which processes more information at once.